Shop Talk Blog

The Official Blog for Texas Final Drive

Are Final Drives, Hydraulic Motors, and Track Motors all the Same?

by Dr McCaslin | Jan 17, 2020 |

Travel Motor, Final drive motor, Swing Motor

|
0 Comments

A lot of people use terms like final drive, travel motor, track drive, and hydraulic motor interchangeably ... but are they really the same?


Here are a few other Shop Talk Blog posts you might find interesting ...

Hydraulic Motors and Productivity

by Dr McCaslin | Apr 29, 2019 |

Final Drive Maintenance, Final drive motor

|
0 Comments

When your hydraulic motor is not performing at peak efficiency, it can impact your overall productivity on the job. In this Shop Talk Blog post, we’ll discuss the relationship between your hydraulic motor and how much work you can get done on the job.


Here are some other Shop Talk Blog posts you might find helpful ...

Hydraulic Motor Drive Shafts

The drive shaft in your final drive motor is used to transfer torque, power and rotational motion. If the drive shaft on a hydraulic motor is going to fail, it will most likely be the result of worn out splines. In this Shop Talk Blog post, we are going to talk about drive shafts, couplers, and gear splines -- and how they can affect your final drive motor performance.

Hard to Find Final Drives

There’s still a lot of equipment out there in operation that is … well … old. It was well made and, through maintenance and good care, has successfully outlived the expectations of many. However, things can become problematic when you can no longer find replacement parts for older equipment -- especially when you can’t find a replacement final drive motor or hydraulic pump. So, what can you do when your equipment is old enough that it becomes hard to find replacements for the track drives or final drive motors?

Here are a few other Shop Talk blog posts that might be helpful:

Revisiting the Topic of Gear Oil

Gear oil is an important piece of the puzzle when it comes to making your final drive motor last. In this Shop Talk Blog post, we are going to talk about gear oil for final drives.

How Does an Axial Piston Final Drive Motor Work

Final drive motors are what keeps much of your equipment running -- skid steer loaders, compact track loaders, excavators, tractors, and more. In this Shop Talk Blog post, we are going to discuss the basics of how one type of final drive motor works -- the axial piston hydraulic motor.


Here are a few more blog posts you might enjoy ...

Typical Seals You'll Find in a Final Drive

If you’ve ever taken a final drive apart, you know that it has a ton of seals and o-rings. Each one serves an important purpose, so for this Shop Talk Blog post we decided to discuss the types of seals used in final drives. We’ll also discuss why they are important, what can happen when they fail, and hints and tips for installing them.

Here are a few other Shop Talk Blog posts you might be interested in ...

Are Aftermarket Final Drives a Good Investment?

When you need a final drive, you are looking for a price that can fit your budget -- but you still need a quality drive that will last. There are off brand drives that you can buy that may be cheaper, but is that a good idea? In this Shop Talk Blog post, we’ll talk about whether non-OEM final drive motors are a good investment for your equipment.

Why Final Drive Bearings Fail

Bearings are one of those components on your final drive motor that is eventually going to wear out. Sometimes, however, they wear out sooner than they should. In this Shop Talk Blog post, we are going to discuss what contributes to bearing failure and how you can maximize the life of your bearings.


Here are some other blog posts we have that you might find helpful ...

Final Drive Lubrication and Contamination

You may have a good understanding of why contamination is bad for your hydraulic system, but did you know it’s just as bad for the planetary side of your final drive motor? Experts agree that lubrication contamination is the number one cause of machinery failure. Dirt, sand, and other abrasive particles can get inside your final drive gearbox and do tremendous damage. In this Shop Talk Blog post, we are going to discuss why contaminated gear oil is a problem, what the results of it are, and how you can minimize it.

 

"Shop Talk Blog" Email Updates

Connect blog-rss-feed 

Posts by Topic

see all